Description
VOOPOO Drag X2 80W Pod System
The Drag X2 takes a single 18650 and gives you 80W with it, which is a lot of output for something this narrow. Gene.TT 2.0 board, three modes, and the 5ml PnP X pod. Buy the cell separately and you can carry a spare instead of a charger.
Highlights
5-80W adjustable, resistance range 0.1ohm to 3.0ohm
Runs on one external 18650 battery (sold separately)
5ml PnP X DTL pod, magnetic connection
Three modes: SMART, RBA and ECO
129.8 x 31.8 x 28.6mm, USB Type-C charging
Ships with a 0.15ohm and a 0.3ohm PnP-X coil
Drag X2 Specs
SpecDetail
Wattage
5-80W, adjustable
Battery
1 x 18650, external, not included
Charging
USB Type-C
Resistance range
0.1ohm to 3.0ohm
Pod capacity
5ml PnP X
Modes
SMART, RBA, ECO
Chipset
Gene.TT 2.0
Airflow
Fixed
Size
129.8 x 31.8 x 28.6mm
E-liquid
Freebase or nic salt, depending on the coil
Coils and Pods That Fit
PartWhat you getNotes
PnP-X coils
0.15ohm to 1.0ohm, seven builds
Press-fit into the pod, no threading
PnP-X cartridge pods
Empty DTL or MTL pod, 5ml
Takes any PnP-X coil, coils sold separately
PnP-X Tank
Empty tank, 5ml, 510 threaded
MTL or DTL version, for 510 mods
Which Resistance to Start With
CoilWattageBest For
0.15ohm mesh
60-80W
Direct lung, freebase
0.2ohm mesh
40-60W
Direct lung, freebase
0.3ohm mesh
32-40W
Direct lung to restricted direct lung
0.45ohm
25-32W
Restricted direct lung
0.6ohm
18-23W
Tighter draw, salt or freebase
0.8ohm
12-16W
Mouth to lung, nic salt
1.0ohm MTL
10-13W
Tightest draw, nic salt
In the Box
Drag X2 device
PnP-X DTL pod, 5ml
1x 0.15ohm PnP-X mesh coil
1x 0.3ohm PnP-X mesh coil
Type-C cable
Battery not included
Why Shop VOOPOO at Central Vapors
We stock every PnP-X resistance from the 0.15ohm mesh through the 1.0ohm MTL build, plus spare PnP-X cartridge pods and the PnP-X Tank, so a replacement is a reorder instead of a hunt. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
Q
Is a battery included?
No. It needs one 18650, sold separately in our 18650 battery section. If you would rather not deal with cells, the Drag S2 is the same platform with a 2500mAh internal battery.
Q
What is the difference between the Drag X2 and the Drag X3?
The Drag X3 adds a touchscreen and accepts a 21700 as well as an 18650. Both cap at 80W and both run the same PnP-X coils.
Q
Which coils fit?
PnP-X, 0.15ohm through 1.0ohm MTL. Not the older PnP coils – the deck changed between the two.
Q
Can I use nic salt?
Yes, with a 0.8ohm or 1.0ohm MTL coil at 10-16W. The two coils in the box are sub-ohm builds for freebase at higher wattage.
Q
Is the airflow adjustable?
Not on the device. Airflow is fixed here, so the coil you pick sets how tight or open the draw feels.
Q
How long does a charge last?
That depends on the 18650 you run and the wattage you sit at. ECO mode trims power to stretch the cell, and a spare 18650 is the fastest way back to full.
For use by adults 21+.
