Description
VOOPOO Drag X3 80W PnP X Pod Kit
The Drag X3 runs on a battery you supply. Drop in a single 18650 for a lighter carry or a 21700 when you want the runtime, and the Gene TT 2.0 board pushes up to 80W either way. The front is a 1.66in touchscreen rather than a button menu, and the touch sensor only answers to skin, so the device will not fire loose in a bag or pocket.
Highlights
5-80W adjustable, resistance range 0.1ohm to 3.0ohm
Takes one 18650 or one 21700 18650 battery (sold separately)
1.66in HD touchscreen with a skin-detect security sensor
Three modes: SMART reads the coil and sets wattage, RBA hands the wattage back to you, ECO stretches the cell
Ships with the 5ml DTL PnP X cartridge and two coils, a 0.15ohm and a 0.3ohm
Zinc alloy and leather body, top airflow, magnetic cartridge connection
Drag X3 Specs
SpecDetail
Wattage
5-80W, adjustable
Battery
1 x 18650 or 1 x 21700, external, not included
Charging
USB Type-C
Voltage
3.2-4.2V
Resistance range
0.1ohm to 3.0ohm
Cartridge capacity
5ml PnP X, top airflow
Modes
SMART, RBA, ECO
Chipset
Gene TT 2.0
Display
1.66in HD touchscreen
Body
Zinc alloy and leather, magnetic connection, 360-degree airflow ring
Drip tip
Wide bore, on the DTL cartridge
Coils and Pods That Fit
PartWhat you getNotes
PnP-X coils
0.15ohm to 1.0ohm, seven builds
Press-fit into the pod, no threading
PnP-X cartridge pods
Empty DTL or MTL pod, 5ml
Takes any PnP-X coil, coils sold separately
PnP-X Tank
Empty tank, 5ml, 510 threaded
MTL or DTL version, for 510 mods
The Drag X3 uses the PnP-X deck, not the older PnP deck. The two do not interchange.
Which Resistance to Start With
CoilWattageBest For
0.15ohm mesh
60-80W
Direct lung, freebase
0.2ohm mesh
40-60W
Direct lung, freebase
0.3ohm mesh
32-40W
Direct lung to restricted direct lung
0.45ohm
25-32W
Restricted direct lung
0.6ohm
18-23W
Tighter draw, salt or freebase
0.8ohm
12-16W
Mouth to lung, nic salt
1.0ohm MTL
10-13W
Tightest draw, nic salt
In the Box
Drag X3 device
PnP X DTL cartridge, 5ml
1x 0.15ohm PnP-X coil
1x 0.3ohm PnP-X coil
Type-C cable
User manual
Battery not included
Why Shop VOOPOO at Central Vapors
We stock every PnP-X resistance from the 0.15ohm mesh through the 1.0ohm MTL build, plus spare PnP-X cartridge pods and the PnP-X Tank, so a replacement is a reorder instead of a hunt. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
Q
Does the Drag X3 come with a battery?
No. It takes one 18650 or one 21700 cell, bought separately. We carry both in our 18650 battery section. An 18650 keeps the device lighter; a 21700 runs longer between swaps.
Q
Which coils does it take?
PnP-X only. Seven resistances from 0.15ohm up to a 1.0ohm MTL build, and they press-fit into the cartridge. Original PnP coils will not seat in a PnP-X pod.
Q
What does the touch sensor do?
It reads skin contact before the device will fire, which is what keeps it from going off against keys or a pocket lining. Screen input works the same way.
Q
SMART, RBA or ECO?
SMART reads the coil and picks a wattage for you, which is where most people leave it. RBA unlocks manual wattage. ECO trims power to stretch the cell when you are away from a charger.
Q
Can I run nic salt in it?
Yes, on the higher-resistance end. The 0.8ohm or 1.0ohm MTL coil at 10-16W is the usual pairing. The kit ships with sub-ohm coils meant for freebase.
Q
What ships in the DTL cartridge?
One 5ml PnP X DTL cartridge with a wide bore tip, plus the two coils listed above. The MTL version of the cartridge is sold separately.
For use by adults 21+.
