Description
Vaporesso GTX Replacement Coils
The Vaporesso GTX coil deck is the plug-and-play system behind most current Vaporesso kits and tanks, from the TARGET and LUXE lines to the GTX Tank and GTX One. Seven resistance builds cover everything from a wide-open 0.15ohm mesh coil down to a tight 1.2ohm MTL build.
Coil version matters: older double-silicone GTX coils are not compatible with newer devices like the LUXE 80 and the GTX Go series pens, which use a redesigned coil deck. Check which version your tank or pod takes before ordering a replacement.
Highlights
7 published resistance builds, 0.15ohm to 1.2ohm, plus GTX-2 mesh variants and an RBA deck
Mesh and dual-wire Regular builds in one lineup
Plug-and-play install, no threading or tools
Sold as a Single Coil or a 5 Pack
GTX Coil Specs
CoilWire / TypeWattage RangeBest
GTX 0.15ohm Mesh
DTL / NiCr
60-75W
70W
GTX 0.2ohm Mesh
DTL / NiCr
45-60W
55W
GTX 0.3ohm Mesh
DTL / NiCr
32-45W
40W
GTX 0.6ohm Mesh
Restricted DTL / FeCrAl
20-30W
28W
GTX 0.8ohm Mesh
Restricted DTL / FeCrAl
12-20W
18W
GTX 1.2ohm Mesh
MTL / FeCrAl
7-11W
11W
GTX 1.2ohm Regular (dual-wire)
MTL / FeCrAl
8-12W
11W
GTX-2 0.6ohm and 0.8ohm Mesh coils are also in the option list above for devices on the newer GTX-2 deck; Vaporesso hasn’t published a separate wattage spec for those yet. The GTX RBA is a rebuildable deck (no fixed resistance) sold for DIY coil building.
Compatible With
Vaporesso XIRON, GTX One, GTX Tank 18 & 22, TARGET PM80, TARGET PM80 SE, TARGET PM30, GEN NANO 80W, LUXE X PRO, LUXE XR MAX, LUXE XR
Vaporesso LUXE X(using XR Pods)
Vaporesso LUXE 80 S, LUXE 80, SWAG PX80(not compatible with the 1.2ohm Regular coil)
Vaporesso LUXE PM40(compatible with 0.6ohm, 0.8ohm, and 1.2ohm Mesh & Regular coils only)
Common Questions
Q
My GTX coil is the double-silicone version – will it fit my device?
Not always. Newer Vaporesso devices, including the LUXE 80 and the GTX Go series pens, use a redesigned coil deck that older double-silicone GTX coils don’t seal against. Check which coil version your tank or pod ships with before ordering.
Q
What’s the difference between GTX Mesh and GTX Regular?
Mesh coils use a flat mesh heating element for faster ramp-up and more even flavor. The 1.2ohm Regular is a dual-wire build aimed at a tighter, more traditional MTL draw. Both land in the same wattage range, so the choice comes down to draw style, not power.
Q
Can I use the GTX RBA to build my own coil?
Yes. The GTX RBA is a rebuildable deck for the same devices as the rest of the GTX line, sold separately from the pre-built coil heads.
Q
How do I know which resistance to reorder?
Check the coil currently installed in your tank or pod – the resistance is usually printed on it – and match it here, since most GTX devices only accept a narrow set of compatible builds.
For use by adults 21+.
