Description
VOOPOO Argus G 25W Pod System
The Argus G is the bar-shaped middle of the Argus pod line. A 1000mAh battery, 5-25W adjustable output, and a 2ml cartridge with the coil built in, in a body 13.5mm thick. There is an airflow switch on the side for mouth-to-lung or restricted lung, a display screen, and a single firing button that also drives the wattage adjustment. It shares its cartridge platform with the rest of the Argus family, so spares carry over in both directions.
Highlights
5-25W adjustable, resistance range 0.5ohm to 3.0ohm
1000mAh internal battery, Type-C charging
110.9 x 25.7 x 13.5mm zinc alloy body
2ml PCTG cartridge, side fill, integrated coil
Airflow adjustment switch for MTL or RDL
Draw activated, with a display screen and magnetic cartridge connection
Ships with two cartridges, a 0.7ohm and a 1.2ohm
Argus G 25W Specs
SpecDetail
Wattage
5-25W, adjustable
Battery
1000mAh internal, non-removable
Charging
USB Type-C
Voltage
3.2-4.2V
Resistance range
0.5ohm to 3.0ohm
Cartridge capacity
2ml, side fill, PCTG
Coil
Integrated, replaced with the whole cartridge
Size
110.9 x 25.7 x 13.5mm
Airflow
Adjustment switch, MTL through RDL
Operation
Draw activated, single button for wattage
Body
Zinc alloy, magnetic cartridge connection
Protection
5s overtime, short circuit, overcharge, low battery, over-current
Pods That Fit
PodResistancesFillNotes
Argus POD Cartridge
0.7ohm, 1.2ohm
Side fill, 2ml
The two cartridges the kit ships with
Argus Top Fill V2 Pods
0.7ohm, 1.0ohm
Top fill, 3ml
Newer family pod, sold as a 3-pack. Fills without leaving the device
The Top Fill V2 pack also includes a 0.4ohm, which VOOPOO rates for 18-30W. That resistance is not on VOOPOO’s compatibility list for the Argus G and this device caps at 25W, so use the 0.7ohm or 1.0ohm here. The same cartridges run in the Argus G2.
Which Resistance to Start With
ResistanceDrawBest For
0.7ohm
Looser mouth-to-lung, or RDL with the airflow open
Freebase e-liquid, or lower-strength salt
1.0ohm
Tight mouth-to-lung
Nic salt, on the Top Fill V2 pod
1.2ohm
Tightest draw in the range
Nic salt at 25-50mg, on the Argus POD cartridge
In the Box
Argus G device
1x 0.7ohm Argus POD cartridge
1x 1.2ohm Argus POD cartridge
Type-C cable
Lanyard
User manual
Why Shop VOOPOO at Central Vapors
Two cartridges in the box means you can try both draws before buying spares, and we stock all three Argus Top Fill V2 resistances for when you do. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
Q
Which pods fit the Argus G?
The 2ml side-fill Argus POD cartridge in 0.7ohm or 1.2ohm, which is what ships in the kit, and the 3ml Argus Top Fill V2 pod in 0.7ohm or 1.0ohm. Both are on VOOPOO’s compatibility list for this device.
Q
Argus G or Argus Pod 20W?
The G adds 5W of headroom and a 1000mAh battery instead of 800mAh, in a slimmer bar-shaped body. Same cartridge platform, so switching does not strand spares you already own.
Q
Which resistance for nic salt?
The 1.2ohm Argus POD cartridge with the airflow switch closed down, or the 1.0ohm Top Fill V2. Both give a tight, quiet draw that suits 25-50mg salt at the low end of the wattage range.
Q
What does the airflow switch actually change?
How much air comes in around the coil. Closed down it is a tight mouth-to-lung draw. Opened up it loosens toward restricted direct lung, which pairs better with the 0.7ohm cartridge.
Q
Can I replace just the coil?
No, the coil is integrated. When the flavor fades you replace the cartridge, which is why the kit ships with two.
Q
What if I want more power later?
The Argus G2 runs to 30W on the same top-fill pods and adds a colour screen. Past that, the Argus Pro 2 is an 80W pod mod on VOOPOO’s PnP coils.
For use by adults 21+.
