Description
VOOPOO Drag 6 Kit with UFORCE X II Tank
The Drag 6 is the big one in the current Drag line: 220W from a 4400mAh internal battery, GENE TT 3.0 board, and a control wheel instead of up-down buttons for wattage. It comes paired with the UFORCE X II tank, a 5ml top-fill tank that runs the same PnP X coils as the rest of the family. Capacitive touch unlock keeps it from firing in a pocket.
Highlights
Up to 220W, GENE TT 3.0 chipset
4400mAh internal battery, Type-C fast charging
Modes: SMART, RBA and TC-TRC temperature control
UFORCE X II tank, 5ml, dual top fill with a quarter-turn lock
Precision control wheel for wattage, 1.66in TFT display
Ships with a 0.15ohm and a 0.3ohm PnP X coil plus a spare glass
Drag 6 Specs
SpecDetail
Wattage
Up to 220W
Battery
4400mAh internal, non-removable
Charging
USB Type-C, fast charge
Modes
SMART, RBA, TC-TRC
Tank
UFORCE X II, 5ml, dual top fill, quarter-turn lock
Coil platform
PnP X, press fit
Display
1.66in TFT
Controls
Precision wattage wheel, capacitive touch unlock
Connection
510 threaded tank
Coils and Pods That Fit
PartWhat you getNotes
PnP-X coils
0.15ohm to 1.0ohm, seven builds
Press-fit into the pod, no threading
PnP-X cartridge pods
Empty DTL or MTL pod, 5ml
Takes any PnP-X coil, coils sold separately
PnP-X Tank
Empty tank, 5ml, 510 threaded
MTL or DTL version, for 510 mods
Which Resistance to Start With
CoilWattageBest For
0.15ohm mesh
60-80W
Direct lung, freebase
0.2ohm mesh
40-60W
Direct lung, freebase
0.3ohm mesh
32-40W
Direct lung to restricted direct lung
0.45ohm
25-32W
Restricted direct lung
0.6ohm
18-23W
Tighter draw, salt or freebase
0.8ohm
12-16W
Mouth to lung, nic salt
1.0ohm MTL
10-13W
Tightest draw, nic salt
The 220W figure is the mod ceiling, not a coil rating. PnP X coils top out at 80W on the 0.15ohm build, so stay inside the range printed on the coil. The headroom is there for RBA decks and other 510 tanks.
In the Box
Drag 6 mod
UFORCE X II tank, 5ml
1x 0.15ohm PnP X coil
1x 0.3ohm PnP X coil
Spare glass
Parts bag
Type-C cable
Why Shop VOOPOO at Central Vapors
We stock every PnP-X resistance from the 0.15ohm mesh through the 1.0ohm MTL build, plus spare PnP-X cartridge pods and the PnP-X Tank, so a replacement is a reorder instead of a hunt. Central Vapors has been filling vape orders since 2013, and every order is backed by our satisfaction guarantee.
Common Questions
Q
Do I need batteries for the Drag 6?
No. The 4400mAh pack is internal and charges over Type-C. Nothing to buy, nothing to swap.
Q
Can it really run 220W?
The mod can. The coils in the box cannot – PnP X tops out at 80W on the 0.15ohm build. Treat the 220W as headroom for an RBA deck or another 510 tank.
Q
Which coils does the UFORCE X II take?
PnP X, the same seven resistances used across the Drag X2, S2 and X3. They press-fit; there is no threading to line up.
Q
How does it fill?
Dual top fill. Quarter-turn the top cap to unlock, pour, close it. The tank stays on the mod.
Q
What is TC-TRC mode?
Temperature control for nickel, titanium or stainless builds, with TRC as VOOPOO’s own curve setting. Mesh coils in the box run in wattage mode, not TC.
Q
Is a spare glass included?
Yes, one spare 5ml glass ships in the kit along with the parts bag of seals.
For use by adults 21+.
